 |
 |
 |
| All
Types of our cartridge heaters can be manufactured
with built-in Fe-Const (up-400) c or niCrNi (
after 400 c ) Thermocouples |
|
| |
 |
| Elbow
Cartridge |
| Protection
of cables by galvanized flexible tube. |
|
 |
Reflexive
Cartridge
| ULTRAMAX
with 90 °C bend, in copper. |
| |
|
 |
| Side
Cartridge |
| ULTRAMAX
with flexible cables at 90 °C exiting the cartridge
tube straight from a side opening. |
|
 |
| Smooth
Cartridge |
- ULTRAMAX
high-wattage cartridges belong to a new generation
of electric heating elements; they make it possible
to use high watt loads in small spaces, thus ensuring
excellent reliability in heavy-duty work conditions.
- Their special construction technology makes them
the most advanced type of heating elements.The entire
length of the wire wound around a magnesium oxide
core is in a far away position from the axis of
the cartridge, very close to the metal sheath, with
a very thin and compressed insulating wall in between;
this allows excellent heat exchange that allows
a much lower temperature of the resistance wire
than in other heaters in which the wire is in a
deeper position.
- Besides the use of advanced technology and
precise inspection techniques in their manufacturing,
Ultramax cartridge heater owe their total reliability
to the use of first-class material from the best
sources in the market.
- Every time a high-reliability and/or high-performance
heater is needed to heat a liquid, solid or gas. |
|
 |
| Smooth
Cartridge |
- Thick bottom, welded with plasma - Perfect waterproof.
- Central tube in high quality magnesia powder.
It supports the resistive wire during compact operation.
- Very efficient insulation in high pure magnesia
with a special and selected granule size.
- Very hard ceramic head.
- Stainless steel tube.
- Nickel-Chrome resistive wire winded with precision.
- Pure nickel spindle with high section receiving
the resistive wire.
- Electric cable "multi wire" in flexible
nickel fiber glass isolated. |
| |
|
|
| UTC
Type 1 |
| Grounded
to a special bottom disk. Guarantees excellent accuracy
of the temperature and quick response. Widely used
in injection systems for plastic materials. |
| |
| |
| UTC
Type 2 (standard) |
| Insulated
in proximity to the bottom disk. Suitable for avoiding
disturbances to very sensitive equipment. This type
is used for the models in stock (see sizes).
|
| |
| |
| UTC
Type 3 |
| Grounded
to the metal sheath within a 12 mm cold section,
located at the center of the heater. Guarantees
excellent accuracy of the temperature and quick
response. It cannot be used in cartridges with a
diameter below 10mm. |
| |
| |
| |
|
| |
|
| TYPE
OF THERMOCOUPLE |
TEMPERATURE
RANGE |
| CODE |
POSITIVE |
COLOR |
NEGATIVE |
COLOR |
| J |
IRON |
RED |
CONSTANTAN |
BLUE |
-20
+ 750ºC |
| K |
CHROMEL |
RED |
ALUMEL |
GREEN |
-20
+ 1250ºC |
|
